Stay on top of all watchmaking news ! OK

This search is sponsored by MB&F

Search in :
Corum - Ti-Bridge Tourbillon

Corum Ti-Bridge Tourbillon

Contemporary high horology.

Press releaseCorum_327791_0


Launched in 2009, the Ti-Bridge wrote a new chapter in the company's history with the creation of a new line in Corum's collection and the advent of the second in-house caliber. A completely different and resolutely contemporary spirit of the baguette movement, the taut lines of the CO007 were highlighted with a set of two titanium “cross bars”.

In 2010, CORUM exalts its well-established expertise in the field of exceptional movements by offering a tourbillon version of this timepiece, the new caliber CO 022, created and developed by Corum. A real feat as it is a flying tourbillon; without upper bridge, the escapement beating at 21'600 vibrations per hour seems to be floating over the baguette movement. The entirety is maintained by elements definitely considered as a unique esthetical signature of the Ti-Bridge; two “cross bars” made in “ARCAP” suspend the movement in the center of the case. A spectacular effect of weightlessness radiates from the timepiece. Esthetical and technical prowess, the plate and bridges are cut from “ARCAP”. This new alloy made of copper and nickel is completely non-magnetic, anti-corrosive and allows for complex finishing. This futuristic material permits traditional decorations like satin-finish and chamfer, which contrasts with the two barrels' sun-brushed decoration. This mechanical hand-wound CO 022 movement is endowed with a 72-hour power reserve.

Water-resistant up to 50 meters, the tonneau-shaped case bears generous dimensions: 42.5 mm by 41.5 mm. Cut from titanium, the case gives pride of place to the caliber and its moving tourbillon, visible from all sides, including the case-back.

The Ti-Bridge Tourbillon will be available in a limited production of 99 pieces with a titanium case graced with alternating surface finishes – polished on top and satin-finished on the side. The model is delivered with two bracelets, one in black rubber and one in hand-stitched leather,. A second version in titanium with black PVD coating, the Black Ti-Bridge Tourbillon, will be issued in a limited edition of 33 pieces.




022.700.04/0001 0000

Limited production of 99


CO 022

Hand wound mechanical flying tourbillon baguette movement

Bridges and plate made of ARCAP, satin-finished, circular-grained and polished angles, bridge
engraved with CORUM logo

Hand-wound by a stem at 3 o'clock

Frequency: 3Hz, 21,600 vibrations/hour

21 jewels

2 barrels with sun brushed finish

Intermediate and ratchet wheel with sun brushed finish

Two ARCAP strut bars fixed on the case and on the movement

Power reserve of 72 hours


Hours, minutes, flying tourbillon


42.5 x 41.5mm

Tonneau-shaped case made of titanium

Polished finish on the top of the case with two sand-blasted grooves, satin-finished case sides

Fluted titanium crown with satin and polished finishes, adorned with CORUM key

6-screw satin-finished case-back with engraved CORUM logo, open case-back under the


Flange in ARCAP with black ruthenium finish

Hour and minute baton hands, faceted, sand-casted, ruthenium coated, with Superluminova


Sapphire crystal with anti-reflective coating


Black crocodile hand-stitched leather strap and vulcanized rubber strap


Titanium triple folding clasp with opening and fastening system using 2 pushers, bearing the CORUM logo

Water resistance

5 atmospheres (165 feet/50 meters)


Recommended reading

Watch Finder

Search by:

Find your watch >

The brand

Corum takes aesthetic daring to the heights of technical perfection. Through a number of collections, drawing on the fundamentals of traditional watchmaking, the manufacture continues to pursue its path free from the influence of passing trends.

Find out more >

All the news >

Contact brand >

All the watches >