IWC Aquatimer Chronograph
The stylish black-and-silver combination in the new Aquatimer Chronograph is inspired by the elements of the Galapagos Islands.
The Aquatimer Chronographs are available with black or silver-plated dials in four different versions, with a black rubber strap or stainless-steel bracelet. The purist dial design and the quarter-hour scale on the internal rotating bezel reference the first Aquatimer released in 1967. The slim, chamfered shape of the external bezel with its gently rounded and recessed grips, on the other hand, was inspired by the legendary Porsche design of the Ocean 2000 of 1982.
The new external/internal rotating bezel mechanism gives the current Aquatimer collection overall a more sophisticated look and feel, despite the addition of a protective cover for the sliding clutch system on the left-hand side of the case. The polished and satin-finished surfaces contribute to the watch’s premium-quality appearance.
From a technical point of view, the newly developed external/ internal rotating bezel represents a remarkable leap forward in the evolution of IWC diver’s watches. For almost half a century, Aquatimers from Schaffhausen were fitted with either an internal rotating bezel or an external rotating bezel. One of the central functions of a diver’s watch is to allow you to see at a glance how long you have already been underwater, and to calculate simply how long your store of compressed air will last. To facilitate this, the triangle marking the start of the dive, the zero point, is synchronized with the minute hand. From now on, elapsed dive time can be read off precisely on the scale. On the internal rotating bezel found in earlier models, the zero point was set with the help of a second crown at “4 o’clock”: it was thus virtually impossible to move the bezel inadvertently. In addition, the luminescent coating beneath the front glass is perfectly protected against dirt and scratches.
On the downside, a crown is not as easy to set as an external rotating bezel. IWC’s technicians therefore opted for an external bezel, which, for safety reasons, could only be rotated anticlockwise. This means that if a diver moves the bezel accidentally, he can only conclude that he has been underwater too long and should soon return to the surface: an annoyance, certainly, but harmless. The new external/ internal rotating bezel with the IWC SafeDive system in the 2014 Aquatimer collection combines ease of use with safety. The rotation of the external bezel is transmitted via a patent-registered sliding clutch system to the rotating bezelwith a triangular index and dive time scale on the inside of the case.
The increase in pressure-resistance from 12 bar to 30 bar provides a greater degree of safety when diving to great depths. Ticking away inside the 44-millimetre stainless-steel case is the robust 79320-calibre chronograph movement with a 44-hour power reserve. It enables stop times and aggregate timing up to 12 hours and is a reliable companion even on long dives. Even in a redundant system, divers appreciate an ongoing indication that everything is functioning normally. In the chronograph, this job is handled by the permanently rotating seconds hand in the subdial at “9 o’clock”.
The new patented IWC bracelet quick-change system for the 2014 Aquatimer generation is sure and practical. It takes the hard work out of swapping from a stainlesssteel bracelet to a rubber strap and vice versa. All the new Aquatimer wristbands are compatible with each other.
With a clear emphasis on technology and development, IWC Schaffhausen has been manufacturing timepieces of lasting value since 1868. Its philosophy, based on a passion for watchmaking, aims to maintain a spirit of indefatigable initiative and impeccable craftsmanship.Find out more
All the news >
Contact brand >
All the watches >