X
Stay on top of all watchmaking news ! OK
×

This search is sponsored by Parmigiani Fleurier

Search in :
Alpina - Seastrong Diver Heritage

Alpina Seastrong Diver Heritage

Following the successful introduction of the first re-interpretations, two new timepieces are added to the collection.

When the first Alpina 10 Super Compressor diving watch was introduced in 1969 it featured two crowns, one of which was used to control the internal rotating bezel that measured elapsed time through a 1-60 min scale. The ‘Seastrong’ was water resistant up to 200m, anti-magnetic and had the characteristic super-compressor case. To pay tribute to this historical collection Alpina has launched since 2016 the “Seastrong Diver Heritage”.

Adjusted to modern standards, the new Alpina Seastrong Diver Heritage bears a 42mm bronze color PVD stainless steel case with two screw-in crowns at 2 and 4 o’clock. The top crown has a grid-like pattern and is used to adjust the rotating inner diving bezel while the bottom crown is used to set the time and date, the watch resists water pressure up to 30 bar, corresponding to a diving depth of 300 m/1000ft.

Seastrong Diver Heritage

© Alpina

Buy this watch

The Alpina Seastrong Diver Heritage uses an automatic movement based on a Sellita SW 200 movement modified by Alpina and named caliber AL-525. This is a 26-jewel self-winding caliber with a 38-hour power reserve and 28,800/h frequency. Available with an elegant brown color dial it features a brown or cream color rotating inner bezel with brown or beige markers, a date window at 4 o’clock, rose gold-plated indexes and hands with white luminous treatment.

Seastrong Diver Heritage

© Alpina

Buy this watch

The brand

Established in 1883, Alpina is recongised as the inventor of the sports watch as we know it today, having presented its Alpina 4 model back in 1938.

Find out more >

All the news >

Contact brand >

All the watches >

Recommended reading