X
Stay on top of all watchmaking news ! OK
×

This search is sponsored by Blancpain

Search in :
Hublot - Classic Fusion extra-thin skeleton

Hublot Classic Fusion extra-thin skeleton

#wtbasel/ This piece is a fine exercise in style, providing a wonderful demonstration of the principle of fusion between Tradition and Modernity.

7 Press release

Something completely new for the Hublot brand: an extra-thin skeleton watch, a Classic Fusion whose design has been refined, while retaining the dynamic and modern codes immediately recognisable as Hublot.

 

Hublot_332013_0" /></p> <p> </p> <p>With a 45 mm diameter, this watch is equipped with a new movement just 2.90 mm thick, developed by Hublot. It comes in a fully skeleton worked version, made to a resolutely graphic design, which enables expert eyes to admire the watch's regulating part, the balance and the escapement... The dial side features the small seconds at 7 o'clock and the hands that match the design of the very first Hublot watches, as a nice nod to the brand's history. With a 90-hour power reserve and 50-metre water resistance, this piece is available in two versions, one in titanium, limited to 1000 pieces, and the other in 18K King Gold, with just 500 pieces.</p> <p>Exhibiting a marvellous balance between the classic extra-thin look, a symbol of watchmaking art, and Hubot's trademark dynamic and modern design, this piece is a fine exercise in style, providing a wonderful demonstration of the principle of fusion between Tradition and Modernity.</p> <p> </p> <p><strong><em>Technical specifications - Classic Fusion extra-thin skeleton</em></strong></p> <p><em>References: <br />515.NX.0170.LR - Titanium, 1000-piece limited series <br />515.OX.0180.LR - 18K King Gold, 500-piece limited series</em></p> <p><em>Case:<br />"Classic FusionTitanium or 18K King Gold, polished and satin-finished

Bezel:
Titanium or 18K King Gold, with vertical satin finish
6 H-shaped countersunk, polished & locked titanium screws

Crystal: 
Sapphire with interior/exterior anti-reflective coating

Bezel Lug:
Black composite resin 

Crown: 
Polished titanium or 18K King Gold, with Hublot logo

Case-back:
Satin-finished titanium or satin-finished 18K King Gold with sapphire crystal, interior anti-reflective coating

Water resistance: 
5 ATM, i.e. approx 50 metres

Dial:
Sapphire with silvered or red gold Hublot logo transfer 
Anti-reflective coating on topside/underside
Polished & rhodium-plated or red gold-plated indexes 

Hands: 
Polished & rhodium-plated or red gold-plated

Movement:
HUB1300 hand-wound skeleton 
Small seconds at 7 o'clock

Thickness: 2.90 mm

Components: 123

Jewels: 23

Frequency: 
3 Hz (21,600 Vib/h)

Power reserve:
Approximately 90 hours

Wristlet: 
Black alligator strap stitched onto black rubber

Clasp:
Deployant buckle in black PVD steel or 18K red gold

 

The brand

From the outset, Hublot has embodied design and innovation that differ markedly from the established watchmaking order. With the impetus provided by Jean-Claude Biver, by 2004 these values had already become the basis of a new DNA, leading the brand, which is currently headed by Ricardo Guadalupe - its CEO since 2012, to develop particularly audacious timepieces – most of them with a highly-developed sporting aspect.

Find out more >

All the news >

Contact brand >

All the watches >